TRENTON Single Board Computer, Dual Xeon 2.4GHz, 1GB DDR200/266 RAM (up to 8GB), E7501 Chipset, PCI/ISA & PCI-X, Dual Gigabit Ethernet, Enhanced ATI video, Dual Ultra320 SCSI, model # XPT/2.4E-NS, OEM(одноплатный промышленный компьютер)

TRENTON Single Board Computer, Dual Xeon CPU

	FEATURES   Dual Intel® Xeon™ Processor   Hyper-Threading technology   E7501 chipset   PCI/ISA & PCI-X   Dual Gigabit Ethernet   Supports up to 8GB of DDR200/266 memory   Enhanced ATI® video   Dual Ultra320 SCSI
DESCRIPTION Capability, flexibility and reliability are designed into Trenton's XPT single board computer. The XPT is packed with key performance features such as dual Intel® Xeon™ processors, PCI-X bus communication, dual Gigabit Ethernet ports, the Intel® E7501 chipset and the M6-16H video controller from ATI Technologies®. These features are capable of handling the most challenging embedded computing applications. Dual Ultra320 SCSI interfaces exemplify the flexibility designed into the XPT. The SBC may be ordered with or without the SCSI interfaces, allowing you to closely match XPT functionality to specific system application needs. Specifications:
PROCESSOR Dual Intel® Xeon™ processors 2.0GHz to 3.06GHz* *higher speeds as available HYPER-THREADING TECHNOLOGY Intel's Hyper-Threading technology makes a single Intel® Xeon™ processor appear as two logical processors. The operating system and application must be optimized for Hyper-Threading. The XPT's two physical Intel® Xeon™ processors will function as four logical processors in applications optimized for Hyper-Threading. CHIPSET The Intel® E7501 chipset provides support for dual Intel® Xeon™ processors, a 400/533 system bus, and PC1600 or PC2100 DDR memory with ECC. SYSTEM BUS The Intel® E7501 chipset supports a system bus speed of 400/533MHz. BUS SPEED ISA 16-bit/8MHz PCI 32-bit/33MHz or 64-bit/66MHz PCI-X 64-bit/66Mhz, 64-bit/100MHz or 64bit/133MHz Hub Link 2.0 1GB/s System/FSB 400/533MHz BIOS (FLASH) AMIBIOS8® has built-in advanced CMOS setup for system parameters, peripheral management for configuring on-board peripherals, PCI-to-PCI bridge support and PCI interrupt steering. Supports flash devices for BIOS upgrading via floppy interface. Also provides integrated support for USB mass storage devices such as USB, CD-ROM, CD-RW, etc. Custom BIOSs are available upon request. CACHE MEMORY Each Intel® Xeon™ processor supports a 512K integrated on-die Advanced Transfer Cache (L2). The cache is an 8-way set associative cache running at full processor core frequency. The Execution Trace Cache (L1) is a 12K data cache that stores thousands of decoded micro-operations. The purpose of this L1 cache is to remove decoder latency from the processor's main execution path, resulting in increased processor performance. DDR200/266 MEMORY The DDR memory interface on the XPT consists of two channels, each terminating at a pair of DIMM module sockets. The XPT supports auto detection of up to 8GB of memory. The system BIOS automatically detects memory type, size and speed. The four memory sockets on the SBC must be populated in pairs, beginning with the sockets in Bank 1, and must contain ECC registered PC1600 or PC2100 DIMMS. All DIMMS must be the same speed (PC1600 or PC2100). The modules within a pair must be the same size; however, if two pairs are used, each pair can contain a different size module. The maximum memory capacity of the XPT is 8GB and the minimum interface bandwidth is 1600MB/s. ERROR CHECKING AND CORRECTION The memory interface supports ECC modes via BIOS setting for multiple-bit error detection and correction of all errors confined to a single nibble. PCI-X BUS INTERFACE The PCI-X bus interface supports a 64-bit PCI-X backplane interface running at either a 66MHz, 100MHz or 133MHz bus speed. PCI BUS INTERFACE The PCI bus interface supports either a 32-bit/33MHz or a 64-bit/66MHz PCI backplane interface. ISA BUS The XPT provides a 16-bit ISA bus interface to the backplane for legacy ISA slots. SYSTEM HARDWARE MONITOR The Winbond W83783S chip supports hardware monitoring. The functions monitored are voltage, fan speed and temperature. The XPT hardware monitor software allows the user to program the monitor limits to provide trigger points for the application software. This allows the application program to monitor these trigger points in order to send system alert messages or perform corrective actions. FLOPPY DRIVE INTERFACE Supports up to two floppy disk drives in combinations of 360K to 2.88MB. ULTRA XGA VIDEO INTERFACE

• Другие товары в категории Одноплатные промышленные компьютеры
• Все товары

У нас Вы можете купить со склада В Москве и под заказ жесткие диски, модули памяти, процессоры, блоки питания, видеокарты и другие комплектующие для серверов и компьютеров.