Qlogic SANblade QLA2340 Fibre Channel (FC) Card/Host Bus adapter (HBA), Single Port (1 channel) 2GB LC multi-mode optic connector, PCI-X 133MHz, OEM (оптиковолоконный контроллер)

Q-Logic Fibre-Channel (QLA2460-E-SP) Storage Controller

Product Details

Характеристики:

DESCRIPTION

EMC approved configuration.
Single Channel 4-Gbps single port Fibre Channel to PCI-X 2.0 266 MHz host bus adapter.

TECH SPECS-

Bus Interface

64-bit, PCI-X 2.0 266-MHz DDR, compatible with 66/33-MHz PCI and 133/100/66-MHz PCI-X

Cable Distances

1 Gbps: 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber
2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber
4 Gbps: 150 meters 50/125 μm fiber, 70 meters 62.5/125 μm fiber

Class of Service

Class 2 and 3

Compliance

PCI Local Bus Specification, revision 2.3, PCI-X Protocol Addendum to the PCI Local Bus Specification, revision 2.0a, PCI-X Electrical and Mechanical Addendum (revision 2.0a) to the PCI Local Bus Specification, PCI Bus Power Management Interface Specifica

Connections

Small form factor fixed (SFF) multimode optic with LC-style connector

Data Transfer Rate

4/2/1 Gbps auto-negotiation (4.2480/ 2.1240/ 1.0625 Gbps)

Hardware Platforms

IA32 (x86), IA64, IEM64T, AMD Opteron 64, Sun SPARC, Apple G5 (Xserve and Power Mac)

Logins

Support for F_Port and FL_Port login. 2,048 concurrent logins and 2,048 active exchanges

Memory

1-MB SRAM, 1-MB flash (SPI), and 2-KB NVRAM (SPI)

Performance

150,000 IOPS

Ports

Single 4-Gbps FC

Power Dissipation

6.5 W (maximum)

Protocols

FCP (SCSI-FCP), IP (FC-IP), FC-TAPE (FCP-2)

Topology

Point-to-point (N_Port), arbitrated loop (NL_Port), and switched fabric (N_Port)