Конвертор интерфейсов Allied Telesis AT-MX10 AUI to BNC Transceiver
Описание и характеристики:
Overview
The Micro Ethernet Transceiver Series of products are direct-attach IEEE 802.3 and
Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with
Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and Fiber Optic
(10BASE-FL, FOIRL) LAN systems. The transceivers support a single AUI that
attaches directly to the AUI 15-pin connection found on most Ethernet stations
(DTEs). Direct AUI connection reduces cabling costs for the installer.
All ATI transceivers are equipped with LEDs providing status and diagnostic
information. LEDs make LAN installation and troubleshooting easy for the installer. An
easily accessible, user-selectable SQE Test switch (heartbeat) is also provided on all
models. ATI uses quality product packaging for increased reliability
Preparation
An SQE Test switch is available to provide IEEE 802.3 Ethernet SQE Testing. If
required, place the SQE Test switch to the “ON” position. The amber LED indicates
the SQE Test is enabled. If the DTE does not require an SQE Test, or if the DTE is a
repeater, place SQE Test switch to “OFF.” The green LED indicates the SQE Test is
disabled. Disable the heartbeat function by turning the SQE Test switch “OFF” when
the Ethernet MAU is connected to a repeater to eliminate the possibility of excessive
collisions.
Installation
The AT-MX10 connects directly to a DTE or workstation AUI connector. Plug the
transceiver into the 15-pin AUI connection on the DTE and slide the connector latch
into place. Power on the DTE and verify that the Power LED is lighted. Check to
ensure that the SQE Test setting is appropriate for equipment per the above
requirements. Plug a BNC-T into the AT-MX10 MAU located at end of Ethernet
segment. Attach 50 W terminator to vacant side of “T” connector. If the AT-MX10 is
located in the middle of a segment, connect the “T” to the AT-MX10S and attach thin
coax segments to each side of the “T.” IEEE 802.3 Specifications: 185m (606 ft.)
maximum cable length, maximum of 30 MAU transceiver attachments.
Manufacturer: Allied Telesis
Part #: AT-MX10
Type: Microtranseiver
Enclosure: Internal
Physical dimensions: 2.5” x 1.8” x 0.8”, 0.15lbs