Переходник Powerleap PL-370/T Socket 370 to Tualatin Adapter

Переходник PowerLeap PL-370/T для процессоров Celeron и Pentium-III (Socket 370), который позволяет увеличить тактовую частоту процессора до 1,26 ГГц в зависимости от частоты системной шины.

PL-370/T использует FC-PGA2-процессоры Intel c ядром Tualatin, включая 1,2 ГГц Celeron с кэшем второго уровня 256 Кбайт и 1,26 ГГц Pentium-III/S с 512 Кбайт кэшем второго уровня.

Ниже приведена инструкция по установке переходника PL-370/T.

To Insert a New CPU into the PL-370/T™

1.   Align both pin-1 corners and place the New CPU on the PL-370/T™. Make sure the CPU is properly inserted in the PL-370/T™ before applying pressure.

2.   Pick up the combined unit by the edges with both hands and verify pin-1 alignment is correct. Squeeze the unit together using evenly applied pressure.

3.   If the New CPU does not easily fit, do not force it. Verify pin 1 alignment is correct. Make sure the new CPU is FIRMLY seated in the PL-370/T™.

To install the PL-370/T™ in a ZIF socket:

1.   Turn the computer off and remove the cover from the computer.

2.   Locate and remove the existing CPU from the ZIF (Zero-Insertion-Force) socket. Install the new PL-370/T™ into the ZIF socket, then lock the PL-370/T™ by pressing the socket arm down.

3.   Connect the power cable to the power connector, use the “Heatsink Compound” on the surface of the CPU for better heat dissipation. Attaching the heatsink/fan on top of the PL-370/T™.

Power on, and you have your PC “Powerleaped”!